Alert Control - visual engineering H.264 User Manual

Visual Engineering
Video solutions. Integrated
HD IP Camera August 2020

Alert Control

Motion and light level triggers can
be configured such that an audible
tone and a visual alarm alerts the
viewer.
These controls can also be set
using the VE Camera Viewer
Motion and dark to light level
triggers can be used to trigger an
OSD (On Screen Display) event. For
this to occur users should ensure
that the OSD Print option in the
User Menu is enabled.
The level of motion required to
invoke a trigger can be set with the
Trigger Sensitivity between: Off,
Low, Mid or High.
The duration of the alarm event
will be the duration of the motion
event plus the time set in the
Trigger Duration field, values from
0 to 100 seconds are valid.
Users should press the submit
button to enable any changes.
Triggered OSD
Alerts
visualengineering.co.uk Page 17