Adjust The Optic Block - Honeywell Vertex Edge User Manual

Adjust the Optic Block

1. In the left navigation panel, tap OVERVIEW
2. Tap on the selected analyzer.
3. In the Components status bar,
Block button
4. In the Optic Block window, tap ADJUST OPTICS, and then tap CONFIRM. Follow onscreen
instructions and finally tap NEXT.
5. Alternate Step. If the cleaning date has expired, the Optic Block button is highlighted in
yellow, as well as the due date, the Optic Drive, and a Module status in the Optic Block
window. Tap ADJUST OPTICS and clean the Optics block by referring to instructions and
reset the count.
Vertex Edge System
.
59
tap on the Optic
User Manual