Table of Contents
Advertisement
Installation Step 6: Data Acquisition System
The data acquisition computer or DAq is the main computer in the Vertex Edge System.
The Vertex Edge System can be connected to an external Ethernet network at the port shown.
Do not connect an external network to the Vertex Edge Ethernet hub. Use only the external
Ethernet connection on the back of the data acquisition computer. Connecting an external
network to the hub will impair monitoring capability.
NOTE
To maintain EMC certification, the Ethernet cable should make 4 loops through the
supplied ferrite cable clamp. The clamp should remain on the outside of the Vertex Edge
enclosure.
Vertex Edge System
CAUTION
42
User Manual
Advertisement
Table of Contents
