Advertisement
We hereby declare that our gas, light oil, heavy oil, and combination (gas/light oil or gas/heavy oil) burners
are manufactured in conformance with current CE, CEI and UNI standards.
• BALTUR guarantees the "CE" certification provided that the burner is coupled to the "CE" gas train supplied
by BALTUR and the "CE" gas line accessories (on request).
NOTE: this declaration is not valid with regard to EC or UNI Standards for gas burners or the gas part of duel-
fuel burners (gas/light oil or gas/heavy oil) when such burners have been ordered in non-compliance with the
EC Standard or Italian UNI Standard because they are to be used for special purposes not provided for in the
above-mentioned standards.
0006080197 Rev.1
- The works on the burner and on the system have to be carried out only by
competent people.
-
Read carefully the instructions before starting the burner and service it.
- The system electric feeding must be disconnected before starting working on it.
- If the works are not carried out correctly it is possible to cause dangerous
accidents.
BALTUR S.p.A.
Via Ferrarese 10 - 44042 CENTO (Ferrara) ITALIA
Tel. 051.684.37.11 Fax 051.685.75.27/28
(International Tel. ++39.051.684.37.11 - Fax ++39.051.683.06.86)
http://www.baltur.it - http://www.baltur.com - E-MAIL info@baltur.it
Manufacturer's declaration
1
L' Amministratore delegato
Dott. Riccardo Fava
Advertisement
