Parts Removal Procedures - Gree SEER13 Series Technical & Service Manual

Household Unit Technical Service Manual

4.3 Parts Removal Procedures

Operating Procedures
1） Remove the cover plate
Loosen the 10 tapping screws fixing the cover plate.
Loosen the 4 tapping screws fixing the cover of electric box (Fig. 1).
Open the cover of electric box and remove the motor wires
From the electric box (Fig. 2).
Raise the cover plate to remove it from the unit (Fig. 3).
Tapping screw
Cover of
electric box
Motor
Capacitor
Compressor
capacitor
35
Illustration
图 1
Fig. 1
Fig. 2
图 3