Gree SEER13 Series Technical & Service Manual page 3

Household Unit Technical Service Manual
3.2.1 Fault Analysis Flow
3.2.2 Fault Analysis
Chapter 4 Care and Maintenance
4.1 Explosion View and Parts List for Model SEER13
4.1.1 Explosion View and Parts List for HW(R)18-D & HW(R)24-D
4.1.2 Explosion View and Parts List for HW(R)30-D
4.1.3 Explosion View and Parts List for HW(R)36-D & HW(R)42-D
4.1.4 Explosion View and Parts List for HW(R)48-D & HW(R)60-D
4.1.5 Explosion View and Parts List for HNF(R)18-D, HNF(R)24-D, HNF(R)30-D, HNF(R)36-D,
HNF(R)42-D, HNF(R)48-D & HNF(R)60-D
4.2 Explosion View and Parts List for Model SEER10~12
4.2.1 Explosion View and Parts List for HW(R)18M-D, HW(R)24M-D, HW(R)30M-D &
HW(R)36M-D
4.2.2 Explosion View and Parts List for HW(R)42M-D, HW(R)48M-D & HW(R)60M-D
4.3 Parts Removal Procedures
4.4 Care and Maintenance
4.4.1 Maintenance of Heat Exchanger
4.4.2 Maintenance at the Start of Service Season
4.4.3 Maintenance at the End of Service Season
4.4.4 Cautions
4.5 Important Repairs
4.5.1 Add compressor oil
4.5.2 Replace the compressor
4.5.3 Treatment of Leakage in System Pipeline
4.5.4 Vacuuming of System Pipeline after Repair
4.5.5 Determination of Refrigerant Charge after Repair
3