Crestron DigitalMedia 3 Series Quick Start Manual page 6

DMPS3-4K-350-C and DMPS3-4K-250-C Series
3-Series® DigitalMedia™ Presentation Systems
Connect to the Cloud
The XiO Cloud® service allows supported Crestron devices across an
enterprise to be managed and configured from one central and secure
location in the cloud. Supported devices are preconfigured to connect to
the service. Use of the service requires a registered XiO Cloud account.
To connect the device to the XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or rear panel of the device. The MAC address and serial
number are required in order to add the device to the XiO Cloud
environment.
2. Do either of the following:
If you have an XiO Cloud account, go to
l
access the XiO Cloud service.
If you do not have an XiO Cloud account, go to
l
www.crestron.com/xiocloud
For detailed information about using the XiO Cloud service, refer to the
XiO Cloud® Provisioning and Management Service User Guide
Route the Inputs
To route the inputs to one or more outputs:
1. Press the ROUTE push button.
2. Press the INPUT push button that corresponds to the input to be
routed.
3. Press the desired OUTPUT push buttons to which the input is to be
routed.
4. Press the ENTER push button.
https://portal.crestron.io
to register for an account.
(Doc. 8214).
Enable the AirMedia Presentation
Gateway (DMPS3-4K-350-C and
DMPS3-4K-250-C Only)
Enabling of the integrated AirMedia® presentation gateway of the
DMPS3-4K-350-C and DMPS3-4K-250-C requires the purchase and
activation of the SW-DMPS3-AIRMEDIA license. When enabled, the
integrated AirMedia presentation gateway eliminates the need for a
Crestron AirMedia Presentation System such as the AM-200.
NOTE: The DMPS3-4K-350-C-AIRMEDIA and DMPS3-4K-250C-
AIRMEDIA devices are shipped from the factory with the integrated
AirMedia presentation gateway already enabled and, therefore, do not
require the purchase and activation of a license.
to
To activate a purchased license for the AirMedia presentation gateway:
1. Obtain the system key from the AirMedia Input Configuration page of
the web interface.
2. Obtain the associated license key by visiting
www.crestron.com/dmps-airmedia-activation.
3. Enable the AirMedia presentation gateway on the AirMedia Input
Configuration page of the web interface.
For detailed information about the activation process for the AirMedia
presentation gateway, refer to Answer ID 5652 in the Online Help section
of the Crestron website.
Quick Start
6