Handle And Throttle Trigger - Husqvarna 525HE3 Workshop Manual

6.15 Handle and throttle trigger

6.15.1 Product overview of the throttle handle
8
1. Throttle trigger
2. Throttle lever
3. Recoil spring
4. Throttle trigger lockout
5. Vibration damping unit
6. Stop switch
7. Right handle half
8. Left handle half
9. Screws
10. Vibration damping units
11. Bolt
12. Bracket
13. Shaft locking screw
1371 - 001 - 02.07.2020
6
5
2
3
4
1
7
6.15.2 To adjust the start throttle speed
WARNING: Use protective glasses and make
sure that the cutting attachment can rotate
freely.
1. Push in the throttle trigger lockout (A) and throttle
trigger (B).
B
5 mm
2. Push and hold the start throttle button (C).
3. Release the throttle trigger lockout to lock the
throttle trigger in start throttle position.
9
10
13
12
11
C
A
D
Repair instructions - 35