To adjust the carburetor settings on
settings, refer to
page 31 .
Basic factory settings
H = high speed jet
L = low speed jet
32 - Repair instructions
H
L
T
2.0
1.75
7.9 Handle and throttle trigger
7.9.1 To disassemble the handle
1. Use a pair of pliers to bend open the cable holder
and remove the throttle wire from the cable holder.
2. Remove the 2 screws, the throttle wire cover and the
throttle wire from the carburetor.
1017 - 002 - 25.11.2020