REPLACEMENT PROCEDURES (continued)
4.12.15 Reinstall the two screws holding the hex standoffs, and reinstall the battery.
4.12.16 Reconnect the ventilator exhaust hose and reinstall the flowmeter housing
back cover.
4.12.17 Perform the PMC Procedure given in Section 6.
VENTILATOR
CONTROLLER
MOUNTING SCREW
VENTILATOR CONTROLLER
MOUNTING SCREW
Figure 4-12. Ventilator Controller (Bezel Assembly)
Rev. L
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
C
B
D
4-36
NM MOBILE
VENTILATOR CONTROLLER
ASSEMBLY
A
SV00313
J2
J1