Page 2
LOW CASTLE FLOOR LOOM (Rear View) upper rear castle side reed heddle bar castle cross beater top back beam breast beam pivot support brake hub front leg brake upper side crank brace beater brake bar jack brake tension adjuster lamm lower rear treadle support castle cross...
Page 3
Heat concentrated on parts Your Schacht loom is a unique tool, of the loom can cause them to dry out and because of the nature of wood, and shrink. This shrinkage can cause each loom will be slightly different.
Page 4
ABOUT THE FINISH ON YOUR connect the lamms to the jacks and SCHACHT LOOM the pivot points of the jack pins. Spray- Your loom has been finished with ing silicon in the harness channels Danish oil.
■ the beater. If it balances, move your Naval Jelly. loom to a more level location, or place Proper care of your Schacht loom ■ a shim under the leg to keep the will increase its lifespan. A simple beater balanced.
Page 6
FLOOR AND WOLF LOOM ACCESSORIES Floor Loom Enhancements Sectional Beam Double Back Beam Lamp Holder for low castle looms Raddle Wolf Loom Enhancements Wolf Pup / Wof Pup LT: Trap Raddle Height Extender Sectional Beam High Castle Tray Wolf Pup 8.10: Trap Raddle Height Extender...
Page 7
WOLF PUP LT LOOM treadle tracker shafts castle side beater removable back beam beater peg knob to remove back beam front beam warp beam front beam extension warp beam crank handle cloth beam black fold knob lamms right rear leg left rear leg tie-up cords rear leg brace...
If you need further assistance, please contact our Customer Service Department at Schacht Spindle Company. At our option, it may be required that the product be returned to our factory freight prepaid for inspection and repair and/or replacement.
Need help?
Do you have a question about the 36” Standard Floor Loom and is the answer not in the manual?
Questions and answers