Page 2
10 – rubber bands Phillips screwdriver 2 – 1-1/4" screws for treadle aid bar Drill and 1/8" drill bit (Baby Wolf looms) Remove the machine screws from Slide in new treadles and spacers on the bottom of both inside legs (where each side in order as shown in figure 1 the treadle assembly is attached).
Page 3
FIGURE 1 - BABY WOLF Inside leg Inside leg - left - right brake regular pedal spacer medium spacer small spacer screw screw barrel nut treadle treadle barrel nut On the left side, slide in a treadle, On the right side, slide in a treadle,...
Page 4
INSTALLING THE TREADLE AID BAR (BABY WOLF LOOMS ONLY) For certain unbalanced weaves (i.e. 5/1 figurative boundweave twill, lace weaves, etc.) it is helpful to prevent shafts from float- ing when many treadles are tied up to just one shaft.
Need help?
Do you have a question about the Baby Wolf and is the answer not in the manual?
Questions and answers