Table of Contents
Advertisement
Customizing this unit (MANUAL SETUP)
Using SET MENU
Use the remote control to access and adjust each
parameter.
y
• You can change the "SET MENU" parameters while this unit is
reproducing sound.
• If you press S PARAMETER during the "SET MENU"
operation, the "SET MENU" operation is canceled.
• Press 9 RETURN to return to the previous menu level.
Press 5 AMP and then M MENU to enter
1
"SET MENU".
The top "SET MENU" display appears in the OSD.
2
Press 8 k / n to select "MANUAL SETUP".
SET MENU
;AUTO SETUP
.
;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:
[ENTER]:
Press 8 ENTER to enter "MANUAL SETUP".
3
The "MANUAL SETUP" display appears in the
OSD.
MANUAL SETUP
.
1 BASIC MENU
2 VOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
[ ]/[ ]:
[ENTER]:
84
En
Up/Down
Enter
Up/Down
Enter
4
Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
menu.
The following displays are examples where "SOUND
MENU" is selected.
3 SOUND MENU
.
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)EXTD SUR.
[ ]/[ ]:
[ENTER]:
5
Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
submenu.
The following display is an example where "LFE
LEVEL" is selected.
B)LFE LEVEL
.
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
[ ]/[ ]:
[p]/[[]:
6
Press 8 k / n to select the desired parameter
and then 8 l / h to change the parameter
settings.
• Press 8 h to increase the value.
• Press 8 l to decrease the value.
Press M MENU to exit from "SET MENU".
7
Up/Down
Enter
Up/Down
Adjust
Advertisement
Table of Contents
