Table of Contents
Advertisement
1 BASIC MENU
Use this feature to manually adjust the basic speaker
settings. Most of the "BASIC MENU" parameters are set
automatically when you run the automatic setup.
1 BASIC MENU
.
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)TEST TONE
[ ]/[ ]:
[ENTER]:
y
Set "TEST TONE" to "ON" to output the test tone for the
"SPEAKER SET", "SP LEVEL" and "SP DISTANCE".
■ Speaker settings
y
To select the desired parameter, press 8 k / n repeatedly.
Extra speakers assignment EXTRA SP ASSIGN
Selects the function of the speakers connected to the
EXTRA SP terminals.
A)SPEAKER SET
X
X
X
EXTRA SP ASSIGN
ZONE2
X
X
ZONE B
NONE
X
X
X
X
XXXX[ ]/[ ]:Up/DownXXXXX
ZONE2 SET
Not Available
XXXX[p]/[[]:EnterXXXXXXX
X
Choice
ZONE2
Select this setting when you use the Zone 2
speakers (see page 104).
FRONT B
Select this setting when you use another front
speaker system in the main zone (see page 43).
ZONE B
Select this setting when you use another front
speaker system in another room (see page 43).
PRESENCE
Select this setting when you use the presence
speakers (see page 13).
NONE
Select this setting when you do not use the
EXTRA SP terminals.
Notes
• This parameter shares the value with the "EXTRA SP
ASSIGN" parameter in "AUTO SETUP" (see page 33).
• If you select "ON" in "BI-AMP" (see page 109), you cannot
select "PRESENCE" or "ZONE2" in "EXTRA SP ASSIGN".
• After changing the "EXTRA SP ASSIGN" setting, carry out
"AUTO SETUP" again (see page 32).
Up/Down
Enter
A)SPEAKER SET
>FRONT B
PRESENCE
Descriptions
Customizing this unit (MANUAL SETUP)
LFE/bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
A)SPEAKER SET
LFE/BASS OUT
SWFR FRONT >BOTH
LFE signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH
Output
SWFR
Output
FRONT
No output
Low-frequency signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH
*1
SWFR
*4
FRONT
No output
*1
Output(s) the low-frequency signals of the front
channels and other speakers set to "SMALL".
*2
Always output the low-frequency signals of the front
channels.
*3
Output the low-frequency signals if the speakers are set
to "LARGE".
*4
Outputs the low-frequency signals of the speakers set to
"SMALL" or "NONE".
Front
Other
speakers
speakers
No output
No output
No output
No output
Output
No output
Front
Other
speakers
speakers
*2
*3
*3
*3
*1
*3
85
En
Advertisement
Table of Contents
