Table of Contents
Advertisement
Before performing the following operations, press 3 XM.
Displaying the XM Satellite Radio
information
You can display the XM Satellite Radio information (such
as channel number, channel name, category, artist name,
or song title) for the currently selected channel in the front
panel display or in the OSD.
Note
If a status message or an error message appears in the front panel
display or in the OSD, see the "XM Satellite Radio" section in
"Troubleshooting" on page 110 for appropriate remedies.
■ Displaying the XM Satellite Radio
information in the front panel display
Press G INFO (or A INFO) repeatedly to toggle
between the following XM Satellite Radio
information display modes.
CHANNEL INFO
e.g.) 043 XMU
Channel number/name
CATEGORY INFO
e.g.) ROCK
Channel category
SONG INFO
e.g.) Coldplay / Sp
Artist name / Song title
ANTENNA INFO
e.g.) 043
Channel number/Antenna reception level
DSP PROG. INFO
e.g.) 7ch Enhancer
Sound field program
Back to "CHANNEL INFO"
y
• The front panel display can indicate up to 14 alphanumeric
• If the XM Satellite Radio information contains a character that
• To hold the current XM Raido information, press 8 ENTER on
• When the antenna of the XM Mini-Tuner Dock cannot receive
■ Displaying the XM Satellite Radio
Press O DISPLAY.
The following screen is displayed in the OSD.
[1] Search mode (see page 58)
[2] Channel category
[3] Song title
[4] Antenna reception level
[5] Channel number/name
ANT:
-
[6] Artist name
y
• To turn off the OSD, press O DISPLAY again.
• XM status messages also appear in the OSD.
• You can select the amount of time the XM Satellite Radio
• To hold the XM Satellite Radio information, press 8 ENTER
• The current XM Satellite Radio reception level appears on the
characters at once. You can set whether to display the XM
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the "FL SCROLL" parameter in "OPTION MENU" (see
page 96).
cannot be recognized by this unit, the character will be
displayed with a space.
the remote control while it is being displayed. The HOLD
indicator flashes in the front panel display while you are
holding the XM information. Press 8 ENTER again to release
the held information.
the signals, "NO SIGNAL" appears in the front panel display.
information in the OSD
XM Information
[1]
ALL CH SEARCH
043:XMU
[2]
:Rock
:Coldplay
:Speed of sound
[3]
information is displayed in the OSD by using the "OSD-
SOURCE" parameter in "OPTION MENU" (see page 96).
on the remote control while it is being displayed in the OSD.
"HOLD" appears in the screen while you are holding the XM
information. Press 8 ENTER again or change the XM Satellite
Radio channel to release the held information.
top of the XM Satellite Radio information screen. For the best
reception, adjust the orientation of the antenna of Home Dock
so that "
" or "
" is displayed here. "
the antenna cannot receive the signals correctly. In this case,
adjust the orientation of the antenna (see page 57).
XM Satellite Radio tuning
[4]
ANT:
[5]
[6]
" is displayed if
61
En
Advertisement
Table of Contents
