Table of Contents
Advertisement
Advanced sound configurations
Selecting decoders
■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi-
channels.
Press 5 AMP and then Q SUR. DECODE
repeatedly on the remote control to select the
desired surround decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
■ Decoder descriptions (SUR.)
Decoder
Pro Logic
PLIIx Movie
PLII Movie
PLIIx Music
PLII Music
PLIIx Game
PLII Game
Neo:6 Cinema
Neo:6 Music
Neural Sur.
(U.S.A. and Canada models
only)
y
When you select the surround decode mode for Dolby Digital, DTS or DTS 96/24 sources, this unit automatically selects "SURROUND
DECODE Dolby Digital", "SURROUND DECODE DTS" or "SURROUND DECODE DTS 96/24" program.
78
En
Dolby Pro Logic processing for any sources.
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources.
decoder is not available when "SUR.B L/R SP" is set to "NONE" (
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources.
decoder is not available when "SUR.B L/R SP" is set to "NONE" (
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for game sources.
is not available when "SUR.B L/R SP" is set to "NONE" (
DTS processing for movie sources.
DTS processing for music sources.
Neural Surround processing for any sources.
The Neural Surround decoder is compatible with PCM signals and analog 2-channel input sources.
When Neural Surround-incompatible signals are being input while the Neural Surround decoder is
selected, multi-channel sources are decoded straight into the appropriate channels without any
additional effect processing and the Neural Surround-incompatible PCM signals are played back in
stereo. The Neural Surround decoder is especially suitable for the XM HD Surround program of XM
Satellite Radio.
y
You can change the decoder parameter settings (see page 79).
Press 5 AMP and then S PARAMETER to display the decoder
parameters in the OSD. Press 8 k / n repeatedly to select the
desired decoder parameter and then press 8 l / h repeatedly to
change the value of the selected parameter.
Descriptions
see page 86
The Pro Logic IIx
see page 86
).
The Pro Logic IIx
see page 86
).
The Pro Logic IIx decoder
).
Advertisement
Table of Contents
