Selecting The Multi Ch Input Component; Selecting The Front Speaker Set - Yamaha HTR-6160 Owner's Manual

Before performing the following operations, press 5 AMP on
the remote control.
Selecting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 25) as the input
source.
Rotate the R INPUT selector to select "MULTI
CH" (or press E MULTI CH IN).
"MULTI CH" appears in the front panel display.
y
Use "MULTI CH" menu in "INPUT MENU" to set the
parameters for MULTI CH INPUT (see page 95).
Note
Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the input
source.

Selecting the front speaker set

Use this feature to turn the front speaker system (FRONT
A and/or FRONT B) on or off.
Press A SPEAKERS on the front panel
repeatedly to turn on or off the set of front
speakers connected to the FRONT A and/or
EXTRA SP speaker terminals.
The active front speaker set changes as follows.
FRONT A
OFF
Notes
• FRONT A and B or FRONT B setting is not available when
"EXTRA SP ASSIGN" is set to "PRESENCE", "ZONE 2" or
"NONE" (see page 85).
• Turn off the volume level of this unit when you switch the front
speaker setting.
■ Using the Zone B feature
When you set "EXTRA SP ASSIGN" to "ZONE B" (
), you can use the speakers connected to the
page 85
EXTRA SP speaker terminals in another room (Zone B).
Press A SPEAKERS on the front panel
repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in
the main room are muted.
Note
If you select the sound field program and activate the Zone B
speakers, Virtual CINEMA DSP activates automatically (see
page 51).
Playback
FRONT B
FRONT A
and
FRONT B
see
43
En