Set Menu - Yamaha RX-V1500 Owner's Manual

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
AUTO SETUP
Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 26).
MANUAL SETUP
Use to manually adjust speaker and system settings.
BASIC MENU
Use to quickly setup basic system parameters (see page 31).
SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 26). You can use SOUND
MENU to make further adjustments, but we recommend running auto setup first.
Item
A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)GRAPHIC EQ
E)LFE LEVEL
F)DYNAMIC RANGE
G)LOW FRQ. TEST
H)HP TONE CTRL
I)AUDIO SET
J)PR/SBch SELECT
INPUT MENU
Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.
Item
A)I/O ASSIGNMENT
B)INPUT MODE
C)INPUT RENAME
D)MULTI CH INPUT
56
SET MENU
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
Adjusts the output level of each speaker.
Adjusts the delay time of each speaker.
Adjusts the tonal quality of each speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital or DTS signals.
Matches the subwoofer level with the level of the other speakers.
Adjusts the tonal balance of the headphones.
Customizes overall audio settings of this unit.
Selects priority to either surround back or presence speakers when both sets of speakers are
connected to this unit.
Assigns jacks according to the component to be used.
Selects the initial input mode of the source.
Changes the name of the inputs.
Sets the direction of the signals input into the center, subwoofer and surround channels for the
source component connected to the MULTI CH INPUT jacks.
Features
Features
Page
58
60
60
61
61
61
62
62
62
63
Page
63
64
64
65