Table of Contents
Advertisement
Connections
Information on HDMI™
■ HDMI signal compatibility
Audio signals
Audio signal
Audio signal
types
formats
2ch Linear
2ch, 32-192 kHz,
PCM
16/20/24 bit
Multi-ch
8ch, 32-192 kHz,
Linear PCM
16/20/24 bit
DSD
2/5.1ch,
2.8224 MHz, 1 bit
Bitstream
Dolby Digital,
DTS
Bitstream (High
Dolby TrueHD,
definition audio)
Dolby Digital Plus,
DTS-HD Master
Audio, DTS-HD High
Resolution Audio,
DTS Express
y
• If the input source component can decode the bitstream audio
signals of audio commentaries, you can play back the audio
sources with the audio commentaries mixed down by using the
following connections:
– multi-channel analog audio input (see page 25)
– DIGITAL INPUT OPTICAL (or COAXIAL)
• Refer to the supplied instruction manuals of the input source
component, and set the component appropriately.
Notes
• When CPPM copy-protected DVD-Audio is played back, video
and audio signals may not be output depending on the type of
the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• To decode audio bitstream signals on this unit, set the input
source component appropriately so that the component outputs
the bitstream audio signals directly (does not decode the
bitstream signals on the component). Refer to the supplied
instruction manuals for details.
• This unit is not compatible with the audio commentary features
(for example, the special audio contents downloaded via Internet)
of Blu-ray Disc or HD DVD. This unit does not play back the
audio commentaries of the Blu-ray Disc or HD DVD contents.
18
En
Video signals
This unit is compatible with the video signals of the
following resolutions:
Compatible
Video signal format
media
– 480i/60 Hz
CD, DVD-Video,
– 576i/50 Hz
DVD-Audio, etc.
– 480p/60 Hz
– 576p/50 Hz
DVD-Audio, Blu-
– 720p/60 Hz, 50 Hz
ray Disc, HD DVD,
etc.
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24 Hz
SA-CD, etc.
Default input assignment of HDMI input jacks
DVD-Video, etc.
IN1
Blu-ray Disc,
IN2
HD DVD, etc.
■ HDMI jack and cable plug
y
• We recommend that you use an HDMI cable shorter than 5
meters (16 feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
this unit to other DVI components.
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
• The analog video signals input at the composite video, S-video
and component video jacks can be digitally up-converted to be
output at the HDMI OUT jack. Set "VIDEO CONV." to "ON"
in "MANUAL SETUP" (see page 97) to activate this feature.
HDMI input jack
Assigned input source
DVD
DTV/CBL
HDMI
HDMI cable plug
↔
DVI-D jack) to connect
Advertisement
Table of Contents
