Table of Contents
Advertisement
See page 106 for the operation of the advanced setup.
■ Remote control AMP ID
Use this feature to set the AMP ID of this unit for remote
control recognition. This feature is useful when you
operate this unit and the other Yamaha receivers/
amplifiers in the same room separately.
Choices: ID1, ID2
• Select "ID1" when the remote control AMP ID code is
set to "5019".
• Select "ID2" when the remote control AMP ID code is
set to "5020".
Setting remote control AMP ID codes
You need to set the remote control AMP ID code for the
remote control.
While pressing and holding 5 AMP on the
1
remote control, press 2 AV POWER for
more than 3 seconds.
5 AMP flashes twice.
AMP
While holding
down
flashes
2
Press the numeric buttons ( G ) to enter the
code number "5019" or "5020".
When the setting succeeds, 5 AMP flashes twice;
however, when it does not, 5 AMP flashes
repeatedly.
AMP ID
Function
code *1
5019
To operate this unit using
(initial setting)
the default code.
To operate this unit using
5020
an alternative code.
*1
The remote control setting
*2
The setting of this unit
REMOTE AMP
POWER
AV
Press for 3
seconds
AMP
Remote
control AMP
ID *2
ID1
(initial setting)
ID2
■ Remote control TUNER ID
Use this feature to set the TUNER ID of this unit for
remote control recognition.
Choices: ID1, ID2
• Select "ID1" when the remote control TUNER ID code
is set to "5007".
• Select "ID2" when the remote control TUNER ID code
is set to "5016".
Setting remote control TUNER ID codes
You need to set the remote control TUNER ID library
code for the remote control.
While pressing and holding 4 TUNER on the
1
remote control, press 2 AV POWER for
more than 3 seconds.
5 AMP flashes twice.
TUNER
While holding
down
flashes
2
Press the numeric buttons ( G ) to enter the
code number "5007" or "5016".
When the setting succeeds, 5 AMP flashes twice;
however, when it does not, 5 AMP flashes
repeatedly.
TUNER ID
Function
code *1
5007
To operate this unit using
(initial setting)
the default code.
To operate this unit using
5016
an alternative code.
*1
The remote control setting
*2
The setting of this unit
Advanced setup
REMOTE TU
POWER
AV
Press for 3
seconds
AMP
Remote
control
TUNER ID *2
ID1
(initial setting)
ID2
107
En
Advertisement
Table of Contents
