Fm/Am Tuning; Overview; Basic Tuning Operations - Yamaha HTR-6160 Owner's Manual

Yamaha stereo receiver user manual
Hide thumbs Also See for HTR-6160:
Table of Contents

Advertisement

Overview

You can use two tuning modes to tune into the desired FM/AM station:
Frequency tuning mode (AUTO TUNING/MANUAL TUNING)
You can search or specify the frequency of the desired FM/AM station automatically or manually (see "Basic tuning
operations" on this page).
Preset tuning mode (PRESET TUNING)
You can preset the desired FM/AM station in advance, and then recall the station by specifying the preset group and
number (see "Using station preset feature" on page 54).
Note
Orient the connected FM and AM antennas for the best reception.

Basic tuning operations

Before performing the following operations, press 4 TUNER
on the remote control.
Rotate the R INPUT selector (or press
1
4 TUNER) to select "TUNER" as the input
source.
Press C BAND (or 7 BAND) to select the
2
reception band.
"FM" or "AM" appears in the front panel display.
Press B SEARCH MODE (or M SRCH
3
MODE) to select the desired tuning mode.
Automatic tuning mode (AUTO TUNING)
Use this feature when the signal from the station you
want to select is strong.
When this unit is in the automatic tuning mode,
"AUTO TUNING" appears in the front panel display
for a moment. The AUTO indicator appears in the
front panel display.
A FM 88.9MHz
No colon (:)

FM/AM tuning

4
Lights up
AUTO
Manual tuning mode (MANUAL TUNING)
Use this feature if the signal from the station you
want to select is weak and you cannot tune by using
the automatic tuning. When this unit is in the manual
tuning mode, "MANUAL TUNING" appears in the
front panel display for a moment.
A FM 88.9MHz
No colon (:)
y
Manually tuning into an FM station automatically switches
the tuner to monaural reception to increase the signal
quality.
Preset tuning mode (PRESET TUNING)
Use this feature to recall the preset stations. When
this unit is in the preset tuning mode, "PRESET
TUNING" appears in the front panel display for a
moment. Frequency tuning is not possible. See
page 54 for details.
Press E PRESET/TUNING/CH l / h (or
8 PRESET/CH k / n) repeatedly to tune into
the desired station.
• Press E h (or 8 k) to tune into a higher
frequency.
• Press E l (or 8 n) to tune into a lower frequency.
FM/AM TUNING
53
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr-6160bl6160 - htr av receiver

Table of Contents