SMC Networks AC10 A Series Operation Manual page 17

AC 10 B - M5
a Float type auto drain
1
b Pressure gauge
2
Attachment (T-spacer)
c
d
3
e Exhaust mechanism
f
g
Note 1) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl.
Releasing the residual condensate before ending operations for the day is recommended.
Note 2) A 1.0 MPa pressure gauge will be fitted. It is not assembled and supplied loose at the time of shipment.
Note 3) The bracket position varies depending on the T-spacer mounting.
Note 4) Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range.
Note 5) Refer to Chemical data on page 3 for chemical resistance of the bowl.
Note 6) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
1N 1N
-
-
1 2 3
Symbol
Nil
Ｃ
Note 1)
＋
Nil
Ｇ
Note 2)
＋
Nil
Note 3)
Ｔ
＋
Note 4)
Nil
Set pressure
１
＋
Nil
Note 5)
２
Bowl
６
＋
Nil
Ｎ
＋
Nil
Flow direction
Ｒ
＋
Nil
Pressure unit
Ｚ
Note 6)
・Option / Semi-standard : Select one each for a to g.
- A
・Option / Semi-standard symbol : When more than
one specification is required, indicate in alphanumeric order.
Example） AC10B-M5CG-T-12NR-A
Without auto drain
N.C. (Normally closed)
Drain port is closed when pressure is not applied.
Without pressure gauge
Round type pressure gauge (without limit indicator)
Without attachment
Mounting position：AF+T+AR
0.05 to 0.7 MPa setting
0.02 to 0.2 MPa setting
Polycarbonate bowl
Metal bowl
Nylon bowl
Relieving type
Non-relieving type
Flow direction：Left to right
Flow direction：Right to left
Name plate, caution plate for bowl, and pressure gauge in imperial units：MPa
Name plate, caution plate for bowl, and pressure gauge in imperial units：psi, °F
15
Description