Function Setup; Audio; Dimmer; Adptv Drc - Yamaha RXV465 - RX AV Receiver Owner's Manual

Operating various settings for this unit (Setup menu)
Auto
Adjustable range: 0 to 240ms (1 ms step)
Enables manual fine adjustment of the correction time
when "HDMI Auto" is set to "On."
Manual
Adjustable range: 0* to 240ms (1 ms step)
Manually adjusts the correction time. Select this when the
connected monitor does not support the automatic lip-sync
function or you set "HDMI Auto" to "Off."

Function Setup

You can set various items for HDMI and display.
1 HDMI
You can set items for HDMI.
■

Standby

On/Off*
Choices:
Selects on or off of output of HDMI signals input from the
HDMI IN jack to the HDMI OUT jack when this unit is on
standby. When this parameter is set to "On" signals input
from the HDMI 1-4 jacks can be output to a monitor
component.
On
Outputs the HDMI signals to the HDMI OUT
jack.
Off
Not output the HDMI signals to the HDMI
OUT jack.
y
• To enables pass-through output, any one of the input sources connected
to the HDMI1-4 must be selected before switching to standby.
• When Standby Through turns on, the HDMI THROUGH indicator on the
front panel display lights up. While the indicator lights up, this unit
consumes up to 3W of power even on standby.
■

Audio

Choices: Amp*/TV/Amp+TV
Selects this unit or a component connected to this unit via
the HDMI OUT jack of this unit for reproducing sound
signals input from the HDMI IN jack.
Amp
Outputs HDMI sound signals form the
speakers connected to this unit.
TV
Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amp+TV
Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.
Note
• Signal formats of audio and visual signals output from this unit to the
monitor vary depending on specifications of the monitor.
42
En
2 Display
You can set items for the front panel display.
■

Dimmer

Adjustable range: -4 to 0*
Sets brightness of the front panel display. As the value is
lowered, the brightness of the front panel display is
darkened.
Note
• The brightness of display does not become bright in direct mode even if
the value is increased.
■

FL Scroll

Cont*/Once
Choices:
Selects the way to scroll the screen when a total number of
characters exceed a display area of the front panel display.
Cont
Repeatedly displays all characters by
scrolling.
Once
Displays all characters by scrolling once,
halts scrolling, and then displays first 14
characters.
3 Volume
You can set items for volumes.
■

Adptv DRC

Auto/Off*
Choices:
Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
If the VOLUME setting is low:
the dynamic range is narrow
If the VOLUME setting is high:
the dynamic range is wide
Auto
Off
Input level
VOLUME: low
Auto
Adjusts the dynamic range automatically.
Off
Not adjust the dynamic range automatically.
y
• The Adaptive DRC setting is effective for headphones.
Auto
Off
Input level
VOLUME: high