Control Technology 2500 Series Installation And Operation Manual page 2

This manual is published by Control Technology Inc., 5734 Middlebrook Pike, Knoxville, TN 37921.
This manual contains references to brand and product names which are tradenames, trademarks,
and/or registered trademarks of Control Technology Inc. Siemens® and Simatic® are registered
trademarks of Siemens AG. Other references to brand and product names are tradenames,
trademarks, and/or registered trademarks of their respective holders.
Every effort has been made to ensure the accuracy of this document; however, errors do occasionally
occur. CTI provides this document on an "as is" basis and assumes no responsibility for direct or
consequential damages resulting from the use of this document. This document is provided without
express or implied warranty of any kind, including but not limited to the warranties of
merchantability or fitness for a particular purpose. This document and the products it references are
subject to change without notice. If you have a comment or discover an error, please call us toll-free
at 1-800-537-8398 or email us at sales@controltechnology.com.
V1.0 04/30/04
V1.1 08/25/04
05/03/07
V1.2 06/22/09
V1.21 08/03/09
V1.3 06/30/15
V1.4 11/17/15
V1.5 12/11/15
V1.6 1/6/2016
V1.7 24JUL2020
Copyright ©2015 Control Technology Inc.
All rights reserved.
DOCUMENT DISCLAIMER STATEMENT
REVISION HISTORY
Original Issue
Changed Profibus address switch open/close labeling
Fixed Profibus connector diagram, added 2500 Series® processors
Added reference to WorkShop Profibus configuration documentation
Corrected Profibus cable impedance typo on p.30 from "135" to "35"
Added section 4.0
Removed reference to Addresses 113 through 125 in Table 1. Profibus
Station Address Settings
Complete edit and update on Chapter 4 w/new screen shots. Added new
reference to CTI 2500 Series® Programming Manual in Chapter 2 Pg
13.
Added reference to CTI CPU in Note on Page 7. Added info to
addressing table on Page 6 (0 is used for Master)
Corrected document title in INFO metadata