Multi-Blade Cutting Tool - Proceq ZCC 2087 Series Instruction Manual

4.2 Multi-blade cutting tool

Loosen the fixing screw (4) with the Allen key.
•
Remove the fixing screw (4) and the multi-blade cutting tool (3).
•
Rotate the multi-blade cutting tool (3) to the next unused blade and re-insert it
•
in this position.
Insert the fixing screw (4) and push the multi-blade cutting tool (3) on the
•
guiding pin.
Refasten the fixing screw (4) with the Allen key.
•
When all three sides of the blades are worn out, the reverse side of the blade can
also be used. Remove the multi-blade cutting tool turn and re-inserted it.
If all six blades are worn out, either a spare multi-blade cutting tool has to be
bought at Zehntner GmbH Testing Instruments, respectively by an authorized
Zehntner agent or the multi-blade cutting tool has to be sharpened at Zehntner.
Our multi-blade cutting tools (3) are equipped with the
amount of blades required by the relevant standard. If one
side is worn out, the multi-blade cutting tool (3) can be
rotated onto an unused side. We suggest to mark the worn
out side, e.g. with a water proof marker and with a black
tip.
Page 11
Correct inserting of the
cutting tool