ADJ VIZI BEAM 12RX User Manual page 23

Manual Control
Select Manual Control, and press ENTER button to confirm. Current channel will show on the
display. Use UP/DOWN button to select Pan, Tilt, Color, Gobo, Prism1, Prism2, RPrism,
Shutter, Dimmer, Dimmer Fine, Focus or Frost, press ENTER button to confirm, then Use
UP/DOWN button to adjust value 000 to 255, press ENTER button to store, and the fixture will
run as the channel value indicates. Press MENU button back to the last menu or exit menu
mode idling one minute.
(All channels value will become 0 after exiting Manual Test menu)
Information
Select Information, and press ENTER button to confirm. Use UP/DOWN buttons to select
Fixture Life Time, Total Lamp Time, Fixture Temps, Fan Info.(RPM), DMX Values, Error
Logs or Software Version.
Fixture Life Time
Select Fixture Life Time, and press ENTER button to confirm. Use UP/DOWN buttons
to select Power On Time, P‐On Time‐R or P‐On Time Reset, and press ENTER button
to store.
Total Lamp Time
Select Total Lamp Time, and press ENTER button to confirm. Use UP/DOWN buttons
to select Lamp On Time, Lamp On Time‐R or Lamp On Time Reset, and press ENTER
button to store.
Fixture Temps
Select Fixture Temps, and press ENTER button to confirm. Use UP/DOWN buttons to
select Head or Reset Head Temp, and press ENTER button to store.
Fan Info.(RPM)
Select Fan Info.(RPM), and press ENTER button to confirm. Use UP/DOWN buttons to
select B_Fan1, B_Fan2, H_Fan1, H_Fan2 or H_Fan3, and press ENTER button to store.
DMX Values
Select DMX Values, and press ENTER button to confirm. Use UP/DOWN buttons to
select Pan, Pan Fine, Tilt, Tilt Fine, Color, Gobo, Prism1, Prism2, RPrism, Shutter,
Dimmer, Dimmer Fine, Focus, Focus Fine, Frost, P/T Speed or Spe. Func, and press
ENTER button to store.
Error Logs
Select Error Logs, and press ENTER button to confirm. Use UP/DOWN buttons to
select Fixture Errors or Reset Error Log, and press ENTER button to store.
Software Version
Select Software Version, and press ENTER button to confirm. Software Version will
show on the display. Press MENU button to exit.
Lamp Control
Select Lamp Control, and press ENTER button to confirm. Use UP/DOWN buttons to select
Lamp ON/OFF, Lamp On with Power, Lamp On via DMX or Lamp Off via DMX, and press
ENTER button to store.
2 3