ADJ VIZI BEAM 12RX User Manual page 21

Personality
Select Personality, and press ENTER button to confirm, use UP/DOWN buttons to select
Status Settings, Reset Motors, Display, or Service.
Status Settings
Select Status Settings, and press ENTER button to confirm. Use UP/DOWN buttons to
select Pan Invert, Tilt Invert, P./T. Feedback, Pan Degree, P./T. Speed or Hibernation,
and press ENTER button to store.
Pan Invert
Select Pan Invert, and press ENTER button to confirm. Use UP/DOWN buttons to
select OFF (pan invert) or ON (normal), and press ENTER button to store.
Tilt Invert
Select Tilt Invert, and press ENTER button to confirm. Use UP/DOWN buttons to select
OFF (tilt invert) or ON (normal), and press ENTER button to store.
P./T. Feedback
Select P ./T. Feedback, and press ENTER button to confirm. Use UP/DOWN buttons to
select OFF or ON, and press ENTER button to store.
Pan Degree
Select Pan Degree, and press ENTER button to confirm, Pan Degree will show on the
display, and press MENU button to exit.
P./T. Speed
Select P ./T. Speed, and press ENTER button to confirm. Use UP/DOWN buttons to
select Speed 1 or Speed 2, and press ENTER button to store.
Hibernation
Select Hibernation, and press ENTER button to confirm. Use UP/DOWN buttons to
select OFF (unit never go into hibernation mode) or 01M~99M (Hibernation mode), and
press ENTER button to store.
Reset Motors
Select Reset Motors, and press ENTER button to confirm. Use UP/DOWN buttons to
select Reset All Motors, Pan/Tilt Reset, Color Reset, Gobo Reset, Prism/R‐P Reset,
Shutter Reset or Frost Reset, and press ENTER button to store.
Reset All Motors
Select Reset All Motors, and press ENTER button to confirm. Use UP/DOWN buttons
to select No or Yes, and press ENTER button to store.
Pan/Tilt Reset
Select Pan/Tilt Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
2 1