ADJ VIZI BEAM 12RX User Manual page 22

Color Reset
Select Color Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
Gobo Reset
Select Gobo Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
Prism/P‐R Reset
Select Prism/P‐R Reset, and press ENTER button to confirm. Use UP/DOWN buttons
to select No or Yes, and press ENTER button to store.
Shutter Reset
Select Shutter Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
Focus Reset
Select Focus Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
Frost Reset
Select Frost Reset, and press ENTER button to confirm. Use UP/DOWN buttons to
select No or Yes, and press ENTER button to store.
Display
Select Display, and press ENTER button to confirm. Use UP/DOWN buttons to select
Intensity, Display Invert, Screen Saver Delay or Display Lock ON/OFF, and press
ENTER button to store.
Intensity
Select Intensity, and press ENTER button to confirm. Current mode will blink on the
display, Use UP/DOWN buttons to adjust backlight intensity from 001 (dark) to 010
(bright), and press ENTER button to store.
Display Invert
Select Display Invert, and press ENTER button to confirm. Use UP/DOWN buttons to
select OFF or ON, and press ENTER button to store.
Screen Saver Delay
Select Screen Saver Delay, and press ENTER button to confirm. Current mode will
blink on the display. Use UP/DOWN buttons to adjust backlight intensity from OFF or
01M to 10M, and press ENTER button to store.
Display Lock ON/OFF
Select Display Lock ON/OFF, and press ENTER button to confirm. Current mode will
blink on the display. Use UP/DOWN buttons to select OFF or ON, and press ENTER
button to store.
Service
Select Service, and press ENTER button to confirm. Current mode will show on the
display, Use UP/DOWN button to select 050, and press ENTER button to confirm. Use
UP/DOWN buttons to select Calibration, USB Port Power, Update Software, or
Factory Restore.
When selecting Calibration, use UP/DOWN buttons to select Pan, Tilt, Shutter, Color,
Gobo, Prism1, RPrism, Prism2, Frost, or Focus, then Use UP and DOWN button to
adjust value.
When selecting USB Port Power, use UP/DOWN buttons to select OFF or ON.
When selecting Update Software, Use UP/DOWN buttons to select NO or YES.
When selecting Factory Restore, use UP/DOWN buttons to select NO or YES.
2 2