ADJ VIZI BEAM 12RX User Manual page 15

I N S T A L L A T I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center
hole of the Omega Brackets. The fixture provides built-in rigging points for a SAFETY CABLE
(not included). Be sure to only use one of the designated rigging points for the safety cable and
never secure a safety cable to a carrying handle.
Clamp
Omega Bracket
Safety Cable
S A F E T Y C A B L E
ALWAYS ATTACH A SAFETY
WHENEVER INSTALLING THIS
FIXTURE IN A SUSPENDED
ENVIRONMENT
THE FIXTURE WILL NOT FALL
IF THE CLAMP FAILS.
1 5
TO ENSURE