ADJ VIZI BEAM 12RX User Manual page 20

MAIN MENU OPTIONS / VALUES (Default Settings in BOLD)
Pan, Tilt, Color, Gobo, Prism1, Prism2, RPrism,
Manual
Shutter, Dimmer, Focus, Frost
Fixture Life Time
Total Lamp Time
Fixture Temps
Information
Fan Info.(RPM)
DMX Values
Error Logs
Software Version
Lamp On/Off
Lamp On with
Power
Lamp Control
Lamp On via DMX ON / OFF
Lamp Off via DMX ON / OFF
DMX Settings
Select DMX Settings, and press ENTER button to confirm. Use UP/DOWN buttons to select
DMX Address, DMX CH Mode, or No DMX Status.
DMX Address — DMX512 address setting
Select DMX Address, and press ENTER button to confirm. Use UP/DOWN buttons to
adjust address from 001 to 512, and press ENTER button to store.
DMX CH Mode — channel mode
Select DMX CH Mode, and press ENTER button to confirm. Use UP/DOWN buttons to
select 13ch or 17ch, and press ENTER button to store.
No DMX Status — fixture state while DMX single stops
Select No DMX Status, and press ENTER button to confirm. Use UP/DOWN buttons to
select Hold Last (If DMX signal stops, fixture continues to obey the last command it
received Via DMX), Blackout (fixture blacks-out if DMX signal stops) or Manual (If DMX
signal stops, fixture returns all channels to the last setting entered manually), and press
ENTER button to store.
In the Blackout / Hold Last state, and with no DMX signal, the unit will remain in the final
state for 15M before reverting to static mode. At this time, the lamp and motors will turn-
off. When the DMX signal is reconnected, the unit will automatically activate and reset.
Power On Time xxxxxx Hours
P- On Time- R xxxxxx Hours
P- On Time Reset Passcode
Lamp On Time xxxxxx Hours
Lamp ON Time-R xxxxxx Hours
Lamp On Time Reset Passcode
Current
Max
Head
Resettable
Max Not
Resettable
Reset Head Temp Passcode
B_Fan 1: xxxx
B_Fan 2: xxxx
H_Fan 1: xxxx
H_Fan 2: xxxx
H_Fan 3: xxxx
Pan, Pan Fine, Tilt, Tilt Fine, Color,
Gobo, Prism1, Prism2, RPrism,
Shutter, Dimmer, Focus, Focus
Fine, Frost, P/T Speed, Spe. Func
Fixture Errors
Reset Error Log
V1.2
ON / OFF
ON / OFF
Set Manual Control values remain set when no DMX
000-255
signal is present, including through a power cycle.
Total hrs. fixture powered ON. Cannot be reset.
Hours fixture powered ON. Can be reset
Reset Power On Time (Passcode = 050)
Resets to 0 when lamp replaced and reset
(Passcode = 050)
xxx F°/xxx C° Current fixture temperature in
Maximum temperature reached since last reset.
xxx F°/xxx C°
Can be reset
Maximum temperature fixture reached. Cannot be
xxx F°/xxx C°
reset
Shall allow for Head Temperature data to be reset.
Should be Passcode protected. Passcode should
be 050.
Displays fan RPM
Displays current DMX Channel value of respective
000-255
fixture trait.
Displays Fixture Errors
Reset Error Log (Passcode = 050.
Displays current software version
Manual ON/OFF lamp control
Controls lamp ON/OFF during power up
Allows lamp ON via DMX
Allows lamp OFF via DMX
2 0
DESCRIPTION