Eaton Cutler-Hammer Digitrip 1150 Instructions Manual page 84

Page 84
This instruction booklet is published solely for information
purposes and should not be considered all inclusive. If
further information is required, consult Cutler-Hammer, Inc.
The sale of the product shown in this literature is subject
to the terms and conditions outlined in appropriate Cutler-
Hammer, Inc., selling policies or other contractual agree-
ments between the parties. This literature is not intended
to and does not enlarge or add to any such contract. The
sole source governing the rights and remedies of any
purchaser of this equipment is the contract between the
purchaser and Cutler-Hammer, Inc.
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUD-
ING WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY, OR WARRANTIES
ARISING FROM THE COURSE OF DEALING OR USAGE
OF TRADE, ARE MADE REGARDING THE INFORMA-
TION, RECOMMENDATIONS, AND DESCRIPTIONS
CONTAINED HEREIN.
In no event will Cutler-Hammer, Inc., be responsible to the
purchaser or user in contract, in tort (including negligence),
strict liability, or otherwise for any special, indirect, inci-
dental, or consequential damage or loss whatsoever,
including, but not limited to, damage or loss of the use of
equipment, plant or power system, cost of capital, loss of
power, additional expenses in the use of existing power
facilities, or claims against the purchaser or user by its
customers resulting from the use of the information,
recommendations, and descriptions contained herein.
Eaton Corporation
Eaton Electrical
Cutler-Hammer Business Unit
1000 Cherrington Parkway
Moon Township, PA 15108-4312 USA
Telephone: 1-800-525-2000
www.eatonelectrical.com
Courtesy of NationalSwitchgear.com
I.L. 70C1036H05
© 2004 Eaton Corporation
All Rights Reserved
Effective: October 2004
Printed in USA
Effective 10/2004