Eaton Cutler-Hammer Digitrip 1150 Instructions Manual page 2

Page 2
Figure 1.1 Digitrip 1150 Catalog # 11PLSIG Trip Unit with Rating Plug
WARNING
DO NOT ATTEMPT TO INSTALL OR PERFORM
MAINTENANCE ON EQUIPMENT WHILE IT IS
ENERGIZED. DEATH OR SEVERE PERSONAL INJURY
CAN RESULT FROM CONTACT WITH ENERGIZED
EQUIPMENT. ALWAYS VERIFY THAT NO VOLTAGE IS
PRESENT BEFORE PROCEEDING. ALWAYS FOLLOW
SAFETY PROCEDURES. CUTLER-HAMMER IS NOT
LIABLE FOR THE MISAPPLICATION OR
MISINSTALLATION OF ITS PRODUCTS.
Courtesy of NationalSwitchgear.com
WARNING
OBSERVE ALL RECOMMENDATIONS, NOTES, CAU-
TIONS, AND WARNINGS RELATING TO THE SAFETY
OF PERSONNEL AND EQUIPMENT. OBSERVE AND
COMPLY WITH ALL GENERAL AND LOCAL HEALTH
AND SAFETY LAWS, CODES, AND PROCEDURES.
NOTE: The recommendations and information contained
herein are based on experience and judgement, but should
not be considered to be all inclusive or to cover every
application or circumstance which may arise.
I.L. 70C1036H05
Effective 10/2004