Table of Contents
Advertisement
Placement of a Sun Product
Do not block or cover the openings of your Sun product. Never place a Sun product
near a radiator or heat register. Failure to follow these guidelines can cause
overheating and affect the reliability of your Sun product.
Secure Installation Requirements
The array rackmounted configuration can exceed 1400 pounds (627 kg).
The floor surface must be level. The cabinet is equipped with wheels, for ease in
installation, and moveability of the system prior to installation. At each corner, on
the base of the cabinet, are adjustable non-skid pads. These must be extended when
the cabinet is installed to stop the cabinet from rolling around. These pads are not to
be used to level the cabinet.
To minimize personal injury in the event of a seismic occurrence, securely fasten the
cabinet to a rigid structure extending from the floor to the ceiling or from the walls
of the room in which the cabinet is located.
Environmental Requirements
This section describes facilities environmental requirements for the Sun StorEdge
6120 array, and includes the following sections:
"Environmental Specifications" on page 5
I
"Electrical and Power Specifications" on page 5
I
"Physical Specifications" on page 6
I
4
Sun StorEdge 6120 Array Site Preparation Guide • April 2003
Advertisement
Table of Contents
