Demo Song Play (Demo) - Yamaha MU50 Owner's Manual

UTILITY MODE
Drum (DrumInit)
Setting: DrumS1, DrumS2
NOTE
This parameter is not available when the MU50 is set to Performance mode.
3 From the "Are you sure?" prompt, press the ENTER
ecute the operation, or press the EXIT
turn to the previous display.
An "Executing..." message appears in the display during the op-
eration. When the operation is completed, the MU50 returns to
the Initialize menu.

Demo Song Play (DEMO)

The Demo Song function in the Utility menu allows you to play the built-
in Demo Song.
Operation
1 Press the UTIL
w buttons, then press the ENTER
2 Press the ENTER
104
This restores the original drum settings for the selected Drum
SetupS1, SetupS2. (Use the VALUE q buttons to select the
desired Drum Setup.)
When C/M or DOC is selected, only DrumS1 can be selected.
UTIL UTIL
UTIL button and select "DEMO" using the SELECT UTIL
ENTER ENTER
ENTER ENTER button to start the Demo Song.
ENTER ENTER button to ex- ENTER
ENTER
EXIT EXIT
EXIT button to cancel it and re- EXIT
ENTER ENTER
ENTER button. ENTER
SELECT SELECT
SELECT SELECT