Yamaha MU50 Owner's Manual page 63

MULTI MODE
For TG300B TG300B TG300B TG300B TG300B mode:
The settings normal and drumS1, drumS2 are available; drum can-
not be selected. When normal is selected, either the basic or the ex-
tended set of Voices (for the TG300B mode) can be used for the Part.
For C/M
The Part Mode settings are fixed in this mode and cannot be changed:
Part 10 is set to drumS1, and all other Parts are set to normal. The
MIDI Receive Channel setting for Part 1 is set to off. The 128 Voices
of C/M Type 1 can be used for Parts 1 — 9; the 64 Voices of C/M Type
2 can be used for Parts 11 — 16.
For DOC
The Part Mode settings are fixed in this mode and cannot be changed:
Parts 1 through 10 are set to normal and Part 15 is set to drumS1.
For PERFORM
All four Parts are set to normal; none of the drum settings are avail-
able. Any of the basic or the extended set of Voices can be used for each
Part.
NOTE
When two or more different Parts are set to the same editable drum setup (drumS1
drumS2 drumS2
drumS2 drumS2), any edits made to that drum setup automatically affect all those Parts. For example, drumS2
when two Parts are set to drumS1
Mono/Poly Mode
Height of bars indicates selected Mono/Poly Mode setting for each
Part. (A single bar indicates "mono" setting, while full height indicates
"poly.")
54
C/M C/M C/M mode: C/M
DOC mode: DOC DOC
DOC
PERFORM PERFORM (Performance) mode: PERFORM
PERFORM
drumS1, any changes made to drumS1 drumS1 drumS1 drumS1
Selected Part and MIDI channel
This determines whether the Part's Voice is played monophonically
(only one note at a time) or polyphonically (up to 32 notes at a
time). This parameter is not available when the Part Mode is set to
Drum.
drumS1 drumS1
drumS1 drumS1 or
drumS1 drumS1 drumS1 affect both Parts. drumS1