Selecting Voices - Yamaha MU50 Owner's Manual

Selecting Voices

In this brief section, you'll learn how to select other Voices. You can do this
directly from the panel of the MU50 or remotely, from your MIDI key-
board.
Operation
1 First, select a Part. Use the PART
2 Use the SELECT
MIDI receive channel for current Part.
Part number. (This is selectable only with the PART
3 Use the V A L U E
Press the appropriate button until "01" appears in the PART sec-
tion of the display.
SELECT w buttons to move the arrow cursor to the
SELECT SELECT SELECT
right side of the instrument icon, as shown below.
Solid arrow at Voice number (currently selected).
Voice name.
Instrument icon of current Voice.
V A L U E q buttons to change the Voice number. In V A L U E V A L U E
V A L U E
the display below, Voice number 26 has been selected.
PART PART q buttons to select Part 1. PART
PART
Arrow cursor (indicates currently selected control).
The arrow is directly above "PGM#" on the panel,
indicating that Program Number is currently selected.
Voice number (program number).
Use these to move arrow cursor.
PART q buttons.) PART PART
PART
GUIDED TOUR
17