Yamaha MU50 Owner's Manual page 127

APPENDIX
Minimum operational range is 00H00H-0CH00H ( octave).
01H 00H
02H 00H
7FH 7FH
5. Channel Mode Messages
Cntrl# Parameter
120 —
Switches off sound from all parts.
Does not reset the settings established by Channel Messages.
Cntrl# Parameter
121 —
Resets the following values: Pitchbend, Modulation, Expression, Sustain, Registered Param-
eter Number, parameter settings.
Resets portamento control. Specifically, clears condition in which source (Portamento
Control Message) has been received but target (new Key On) has not.
Leaves the following values unchanged: Program Change, Bank Select MSB/LSB, Vol-
ume, Pan, Dry Send Level, Effects Send Levels 1 ~ 5, Pitchbend Sensitivity, Fine Tuning,
Coarse Tuning.
Cntrl# Parameter
123 —
Switches off all currently "on" notes in all parts. Any notes being held by sustain or sostenuto
continue to sound until sustain/sostenuto goes off.
Cntrl# Parameter
124 —
Same processing as for All Notes Off.
118
mmH Fine Tune
mmH Coarse Tune
Null
Data Range
0
Data Range
0
Data Range
0
Data Range
0
mm: 00H-40H-7FH (-64-0-+63)
Default: 40 00H
mm: 00H-40H-7FH (-64-0-+63)
Default: 40 00H
—