Changing The Volume And Pan Settings Of A Part - Yamaha MU50 Owner's Manual

GUIDED TOUR

Changing the Volume and Pan settings of a Part

Now that you're playing two Voices at the same time, you may want to ad-
just their settings. Here, we'll change the Volume and Pan settings of one
Part's Voice.
Operation
1 Use the PART
2 Use the SELECT
3 Use the VALUE
4 Now that you've adjusted the Volume balance of the two Voices,
5 Use the VALUE
If you want, try making changes to some of the other Part controls. The
procedure is the same: 1) Use the PART q buttons to select a Part, 2)
use the SELECT w buttons to choose the desired control, and 3) use
the VALUE q buttons to change the setting. For more information on
the Part controls, see page 36.
22
PART q buttons to select the desired Part (Part 1 or 2).
PART PART
PART
SELECT SELECT SELECT w buttons to call up the "Volume" display
SELECT
below.
VALUE VALUE q buttons to change the setting, and play the VALUE
VALUE
keyboard as you make changes.
change one of the Part's Pan setting. Use the SELECT
tons to call up the "Pan" display below.
VALUE VALUE q buttons to change the setting, and play the VALUE
VALUE
keyboard again as you make changes.
Current Volume setting.
SELECT w but- SELECT SELECT
SELECT
Current Pan setting.