Yamaha MU50 Owner's Manual page 85

PERFORMANCE MODE
Operation
1 From the Performance Name display, press the ENTER
2 Use the SELECT
(flashing character) in the name and use the VALUE
tons to change the character at that position.
Flashes to indicate character position.
Up to 12 characters can be used for the Performance name.
Available characters include all letters of the alphabet, in both
upper and lower case, numbers from 0 to 9, and a variety of mis-
cellaneous characters.
3 Press the EXIT
the PLAY
After creating and naming a Performance, you'll probably want to
save that Performance for future recall. For instructions on saving a
Performance, refer to the Store operation on page 84.
76
Performance name
SELECT SELECT w buttons to select the character position SELECT
SELECT
EXIT button to return to the previous display (or press EXIT EXIT EXIT
PLAY PLAY PLAY button to return to the Play display). PLAY
Use these to move among character positions.
Use these to change character at selected position.
ENTER button. ENTER ENTER ENTER
VALUE VALUE q but- VALUE
VALUE