Sampling Pad Section - Yamaha AW4416 Operation Manual

C [STOP] key
This key interrupts playback, recording, rewind, or fast-forward, and stops the
recorder.
D [PLAY] key
If the recorder is stopped, pressing this key will begin playback (if the key is
pressed by itself) or record (if the key is pressed while holding down the [REC]
key). If this key is pressed during rewind or fast-forward, the respective operation
will be interrupted, and normal-speed playback will begin. If this key is pressed
during recording, recording will be interrupted and playback will continue
(punch-out).
E [REC] key
If the recorder is stopped, pressing this key holding down the [PLAY] key will
begin recording. Pressing this key holding down the [PLAY] key during playback
will begin recording from that point (punch-in).

SAMPLING PAD section

In this section you can operate the built-in sampler.
1
A B SHIFT
1
BANK
2
1 A/B bank indicators
These will light to indicate the currently selected bank (A or B) of sampling pads.
B [BANK] pad
This pad selects the pad bank (A or B).
C [EDIT] pad
This pad accesses the SAMP.PAD screen, where you can assign sampled sounds
or tracks to each pad.
D Pads 1–8
These pads play back the sampled sounds that have been assigned to each pad.
F1 F2 F3
SAMPLING PAD
2 3 4
4
Chapter2—Parts and their functions
F4 F5
SHIFT
5 6 7
PROFESSIONAL AUDIO WORKSTATION
A B
SAMPLING PAD
BANK 1 2 3 4 5 6 7 8 EDIT
8
EDIT
3
45
— Operation Guide