Scsi Connector - Yamaha AW4416 Operation Manual

Professional audio workstation
Hide thumbs Also See for AW4416:
Table of Contents

Advertisement

Chapter2—Parts and their functions
K OPTION I/O slots 1/2
These slots allow optional I/O cards to be installed. Assignments for the signals
input or output via the I/O cards are made in the SETUP screen
(
P.133), and in the SETUP screen
Note
For details on installing an I/O card, refer to page 14.
L PHONES jack
This is a stereo headphone jack that allows a set of stereo headphones to be con-
nected. This jack will always output the same signal as the MONITOR OUT jacks.
M DIGITAL STEREO IN jack
This is a coaxial jack that digitally inputs a stereo signal. It is compatible with the
IEC958 consumer format. The channel to which this signal will be input is
assigned in the SETUP screen
N DIGITAL STEREO OUT jack
This is a coaxial jack that digitally outputs the stereo signal assigned to D.ST OUT
in the SETUP screen
IEC958 consumer format.
O WORD CLOCK IN jack
P WORD CLOCK OUT jack
These are BNC type jacks for input/output of a word clock signal. They are used
to synchronize the digital audio signal processing with an external device.
Q SCSI connector
This is a D-sub half-pitch 50 pin SCSI connector that is compatible with the SCSI-
2 standard. SCSI-2 compatible storage devices can be connected for data backup.
48
— Operation Guide
R
TO HOST
MTC OUT
POWER
ON/
OFF
AC INLET
Z
S
T
U
Patch OUT page (
Patch OUT page (
Q
P
O
SCSI
WORD CLOCK
OUT
IN
MIDI
OUT/ THRU
IN
V
W
Patch IN page (
P.133).
P.136). It is compatible with the
Patch IN page
P.136).
N
M
L
DIGITAL STEREO
OUT
IN
PHONES
MOUSE
FOOT SW
X
Y

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents