Playing Back Automix - Yamaha AW4416 Operation Manual

Chapter14—Automix
11. If you wish to update the automix with the newly recorded content,
move the cursor to the OK button and press the [ENTER] key.
The automix will be updated. If you move the cursor to the CANCEL button and
press the [ENTER] key, the recorded content will be discarded, and the automix
will return to its previous state.
Note
• If in step 10 you move the cursor to the ABORT button and press the [ENTER]
• Automix recording can also be stopped by using the on-screen STOP button
• Even after updating the automix content, you still move the cursor to the

Playing back automix

Here's how to play back the recorded automix.
1. Press the [AUTOMIX] key
2. Make sure that the button in the AUTOMIX field is displayed as
"ENABLE."
If the button is displayed as "DISABLE," move the cursor to the button, and press
the [ENTER] key.
3. Make sure that the on-screen REC button and AUTO REC button are
turned off.
If they are on, move the cursor to the corresponding button, and press the
[ENTER] key.
4. Locate the song to a point slightly earlier than where you began record-
ing automix, and press the top panel [PLAY] key.
218
— Operation Guide
key, the recorded content will be discarded in the same way, and the automix
will return to its previous state.
instead of the [STOP] key. In this case, automix recording will stop, but the
song will continue playing.
UNDO button in the right side of the screen, and press the [ENTER] key to
return the automix to its state before recording (Undo). The front panel
[UNDO] key cannot be used to undo automix.
On
Off
[F1] key.