Rollback Function - Yamaha AW4416 Operation Manual

Rollback function

While the song is stopped or playing, you can press the [ROLL BACK] key of the
Locate section to move the current location back by a fixed length. This is conve-
nient when you are playing back, and come to a location that you wish to listen
to once again. The rollback time is set to 5 seconds by default, but can be
adjusted as desired.
1. With the song stopped, press the [UTILITY] key
2. Move the cursor to the ROLLBACK TIME field, and use the [DATA/JOG]
dial to set the rollback time.
The rollback time can be adjusted in millisecond steps over a range of 0–5 sec-
onds (default setting is 5 seconds).
3. When the song is stopped or playing, press the [ROLL BACK] key.
If the [ROLL BACK] key is pressed while stopped, the current location will simply
move back by the length of the rollback time. If pressed while playing, playback
will resume immediately after the rollback occurs.
Rollback time
setting
Chapter6—Transport/locate operations
MARK SEARCH
7 8 9
NUM
MARK
LOCATE
LAST REC
LAST REC
4 5 6
AUTO
IN OUT SET
PUNCH
1 2 3
REPEAT A B ROLL
BACK
0
CANCEL
RTZ
NO
[F3] key.
113
— Operation Guide