Track Editing Procedure - Yamaha AW4416 Operation Manual

Chapter9—Track and virtual track operations
5. Use the CURSOR [
wish to name, and press the [ENTER] key.
6. Move the cursor to the NAME button and press the [ENTER] key.
A NAME EDIT popup window will appear, allowing you to assign a name to the
region.
7. When you have finished inputting the name, move the cursor to the OK
button and press the [ENTER] key. (For details on inputting characters,
refer to page 60.)
You will return to the screen of step 1.
Tip!
You can assign a region name of up to 8 characters.

Track editing procedure

Here's the basic procedure for editing tracks, parts, or regions for audio tracks 1–
16.
1. In the RECORDER section, press the [EDIT] key
The EDIT screen TR Edit page will appear.
This screen shows the following information.
1 Track number
This is the track number 1–16.
B Pair
This shows the pairing status for adjacent odd-numbered
tracks. Pairing can also be set or defeated in this screen.
C Track name
This is the name assigned to each virtual track.
D Bar graph
Bar graphs indicate the presence or absence of audio data for each track.
156
— Operation Guide
]/[ ]/[ ]/[ ] keys to select the region that you
21 3
5
6
[F1] key.
4
even-numbered