Yamaha AW4416 Operation Manual page 236

Chapter14—Automix
2. Move the cursor to the SCENE/LIB button, and press the [ENTER] key.
The scene/library recall events recorded in the automix will be displayed in the
list. The event enclosed by the dashed line in the center of the list is the event cur-
rently selected for editing.
3. Move the cursor to the
JOG] dial to scroll the list and select the event that you wish to edit.
4. Use the CURSOR [
within that event that you wish to edit.
E TIME
The timing at which the event will be executed is displayed as "hours:min-
utes:seconds:milliseconds."
F EVENT
This area shows the type and value of the event. The type of events that can be
selected in this area will depend on which of the buttons above has been pressed.
When the SCENE/LIB button is on, the following events can be selected.
• SCENE .................Scene memories. The value at the right is the number of the
• EQ.Lib. ................EQ libraries. The value at the right is the number of the EQ
• DY.Lib. ................Dynamics libraries. The value at the right is the number of
• EF.Lib. ..................Effect libraries. The value at the right is the number of the
• CH.Lib. ................Channel libraries. The value at the right is the number of the
G CHANNEL
This shows the channel (input channels 1–24, monitor channels 1–16, stereo out-
put channel, return channels 1/2) for which the event will be recalled. This will
be blank if scene memory has been selected in 6.
5. Rotate the [DATA/JOG] dial to modify the value of the item where the
cursor is located.
226
— Operation Guide
at the left of the list, and rotate the [DATA/
]/[ ] keys to move the cursor to the data item
scene that will be recalled.
library that will be recalled.
the dynamics library that will be recalled.
effect library that will be recalled.
channel library that will be recalled.