Virtual Track Editing Procedure - Yamaha AW4416 Operation Manual

8. To execute the editing command, move the cursor to the EXECUTE but-
ton, and press the [ENTER] key.
The editing command you selected in step 3 will be executed.
Tip!
• If you wish to halt the editing operation, move the cursor to a button in the top
level, and press the [ENTER] key.
• As exceptions, the TRACK menu NAME command and the REGION menu
NAME command do not require you to use the EXECUTE button.
• Even after executing an editing command, you can use the [UNDO] button to
cancel the results of the operation. (The TRACK menu NAME command and
the REGION menu NAME command are exceptions to this.)

Virtual track editing procedure

Here's the basic procedure for editing entire tracks, parts, or regions for virtual
tracks 1–8 of the desired track.
1. In the RECORDER section, press the [EDIT] key
The EDIT screen V.TR Edit page will appear, where you can edit virtual tracks.
5
6
This screen shows the following information.
1 Track number
This is the track number (1–16) currently selected for editing.
If this track is paired, a heart symbol and the other track of the pair will be dis-
played.
B Virtual track number
This is the virtual track number 1–8.
C Track name
This is the name assigned to the virtual track.
D Bar graph
Bar graphs indicate the presence or absence of audio data for each virtual track.
Chapter9—Track and virtual track operations
2 1 3 4
[F2] key.
159
— Operation Guide