Writing Audio From A Virtual Track To A Wav File; Use The Append Command To Join Regions - Yamaha AW4416 Supplement Manual

Additions and changes in version 1.2, 1.3
13. If you are converting a 24 bit audio track to a 16 bit WAV file, move the cursor
to the TO SIZE parameter button, and press the [ENTER] key.
If the sample size of the current song is 24 bit, the lowest 8 bits will be discarded,
and the data will be converted and written as a 16 bit WAV file.
Tip
• If you are writing 24 bit data to a WAV file without conversion, steps 12–13 are
• If the current song is 16 bit, the TO SIZE parameter will be only 16 bit and can-
14. To write the WAV file, move the cursor to the EXECUTE button and press the
[ENTER] key.
A popup window will appear, asking you to confirm the operation.
15. Move the cursor to the OK button, and press the [ENTER] key.
The WAV file will be written.
Writing audio from a virtual track to a WAV file
The EXPORT command can also be used in the V.TR Edit page to write audio data
from a desired virtual track to a WAV file. With the difference that you will first
access the EDIT screen V.TR Edit page ([EDIT] key
track 1–8 as the object of the operation, the procedure is the same as for the
EXPORT command. Refer to the preceding explanation for details.

Use the APPEND command to join regions

Multiple regions in a desired track or virtual
track can now be combined into one
region. To do this, use the APPEND com-
mand that has been added to the TRACK/
PART menu of the EDIT screen / TR Edit
page, and to the TRACK/PART menu of the
EDIT screen / V.TR Edit page.
When you use the APPEND command, the
gap between regions will be converted as
silent audio data.
The APPEND command will require process-
ing time that is longer than the actual time.
Also, the command cannot be cancelled once
it has been executed.
10
not necessary.
not be changed.
[F2] key) and select a virtual
APPEND command