5.11.2 Gas train
Approved according to standard EN 676 and provided separately
from the burner.
To select the correct gas train model, refer to the supplied "Burn-
er-gas train combination" manual.
5.11.3 Gas train installation
Disconnect the electrical power using the main
switch.
DANGER
Check that there are no gas leaks.
Installation
20065564
23
Pay attention when handling the train: danger of
crushing of limbs.
Make sure that the gas train is properly installed
by checking for any fuel leaks.
The operator must use the required equipment
during installation.
GB
Fig. 26
20123768