Preparation; Overview; General - Eaton Matrix Telecom Inverter System Installation And Operation Manual

C h a p t e r 2

Preparation

Overview

Topic

General

Battery Precautions
Wiring Requirements
Inspecting the Equipment and Reporting Damage
General
Before installing and using the Matrix Telecom Inverter System, read all instructions and
1
cautionary markings on the equipment and all appropriate sections of this guide. Be sure to
read all instructions and cautionary markings for any equipment attached to this unit.
This unit is designed for indoor use only. Do not expose the equipment to rain, snow, or
2
spray.
To reduce the risk of fire hazard, do not cover or obstruct the ventilation openings. Do not
3
install the equipment in a zero-clearance compartment.
Use only attachments recommended or sold by the manufacturer. Doing otherwise may
4
result in a risk of fire, electric shock, or other injury.
To avoid a risk of fire and electric shock, make sure that existing wiring is in good
5
condition and that wire is not undersized. Do not operate the equipment with damaged or
substandard wiring.
Do not operate the equipment if it has been damaged in any way.
6
Copyright © 2008-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-68D
Preparation
February 2010
Chapter 2
Page
7
8
8
8
7