Realtime Recording: Pattern Track - Yamaha QY700 Owner's Manual

Realtime Recording: PATTERN Track

Recording track
Style no.
Section
SHIFT F1 F2
• You use this function to select patterns (styles and sections)
in real time.
• This section describes the
method. When you record with this method, you overwrite
any data already existing on the track. This is useful when
you want to redo an arrangement that you are not satisfied
with.
• Note that it is not possible to select the
method for PATTERN-track recording.
• The "section connection" setting may cause automatic sec-
tion switching or automatic termination of the song.
( p.202)
• Style number:
0101
1101
• Section:
1. At the SONG PLAY screen, press
The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press (REPLACE).
F3 F4 F5
(REPLACE) realtime
(OVERDUB)
00 (=off), 01,...,64, 65 (=end)
A,...,H
.
Chapter 2. SONG MODE
Recording mode
F6 SHIFT EXIT
3. Press
the recording track to PATTERN.
4. Move the cursor to the style number entry on the
screen. Use
the style number for the first measure. Then set the
section by pressing a key from E2(A) to E3(H) on the
microkeyboard.
5. Press .
The PLAY indicator begins flashing. The QY700 counts
out the specified number of lead-in measures (as set by the
COUNT parameter; see page 78), and then begins the re-
cording.
6. Leave the cursor positioned at the style-number area
as the recording proceeds. To switch the style number,
use ,
section, press a key from E2(A) to E3(H).
• The changes that you make become effective starting from
the next measure. (The QY700 does not change patterns in
the middle of a measure.) In other words, the screen always
indicates the style and section to be recorded into the
upcoming measure.
7. When you are ready to stop recording, press
The QY700 returns to the SONG PLAY screen.
5. Song Recording
SONG PLAY
Song Recording
Replace
Overdub
TR1~TR32
PATTERN
CHORD
TEMPO
or as necessary to set
, , or the numeric keypad to select
, or the numeric keypad. To switch the
2
.
113